1byone Wireless Home Security Driveway Alarm, 2 Battery-operated / AC Adapter Receivers and 1 PIR Motion Sensor Detector Weatherproof Patrol Infrared Alert System Kit

This wireless home security driveway alarm is the answer to all of your home security problems. The 1byone driveway alarm system has an alarm that provides a signal immediately when someone intrudes your property without your permission.


Inside the 1byone Wireless Home Security Box

  • 1 x PIR Transmitters
  • 2 x Receivers
  • 1 x Instruction Manual
  • 5 x Wall Plugs
  • 5 x Screws


The Communication range of the device is up to 100m/328ft.  This is the distance from the sensors to the receiver. The recognition range of the infrared sensor is approximately 5-8m/16-26ft which will help to keep you informed and protected.

The alarm in the receiver blares at 100 decibels. There are 3 modes to choose from (Sound/LED Flash/Sound and LED Flash) and 3 warning signal choices (High Volume Chime/Low Volume Chime/Alarm).

Some of the technical Specifications:

  • Power Supply (Receiver): DC 6 V or 1.5 V C Battery x 3 (not included)
  • Power Supply (PIR Transmitter): DC 4.5 V (1.5 V AAA Battery x 3)
  • Motion detecting range: 5 – 8 m/16-26ft
  • Operating range: 100m/328ft
  • Ring Volume: ≥100dB (within 0.5 m/1.6ft)

Why choose this 1byone Wireless Home Security Driveway Alarm?

This product is very dependable and is worth the price tag. The sensor uses state-of-the-art passive-infrared (PIR), which has the ability to detect any movement within its range. The device is perfect for long or hidden driveways which allows a greater warning to home owners.

The device has a feature for expanding for when you need more than one driveway or area monitored. The system can be expanded with up to 50 additional sensors or receivers. The device can utilize both 3 x 1.5V C batteries or an AC power adapter (not included). You can choose to use one or the other but not both.

The device includes a Sound and Flash Switch Button: Press this button for three options, differing between sound and LED Flash. You can conveniently install the receiver with three 1.5 volts’ type ‘C’ alkaline batteries or just plug the receiver into the AC power adapter (OUS00-0278). One thing to be aware of is you cannot install this device in direct sunlight or where it could be affected by the wind. When installing outside, it’s best if its mounted in a protected place with minimal temperature variance.

Final Verdict for 1byone Wireless Home Security Driveway Alarm

The final verdict would be if you need an alarm that can help you signal when there is an intruder, this is the alarm for you. The receiver can pair up to 50 sensors effectively securing a large area.  If you need to monitor a large area, our sensors will do a great job.